PTH12060Y Datasheet | Emerson

Features - VTT bus termination output (output the system VREF) - 10 A output current - 3.3, 5 or 12 Vdc input voltage - DDR and QDR patible - ON/OFF inhibit (for VTT standby) - Under-voltage lockout - Operating temperature range: -40 °C to +85 °C - Efficiencies up to 91% - Output overcurrent protection (non-latching, auto-reset) - Point-of-Load-Alliance (POLA) patible - Available Ro HS pliant - 2 Year Warranty Specifications Input Input current: Input voltage range: No load PTH03060Y PTH05060Y PTH12060Y Vin increasing Vin decreasing Vin increasing Vin decreasing Vin increasing Vin decreasing PTH03060Y & PTH05060Y PTH12060Y 10 m A 2.95 - 3.65 Vdc 4.5 - 5.5 Vdc 10.8 - 13.2 Vdc 2.45 V typ., 2.80 V max. 2.20 V min., 2.40 V typ. 4.30 V typ., 4.45 V max. 3.40 V min., 3.70 V typ. 9.5 V typ., 10.4 V max. 8.80 V min., 9.0 V typ. 330 µF 560 µF Positive logic Undervoltage lockout: PTH03060Y PTH05060Y PTH12060Y Input capacitance: (See Note 3, page 3) Remote ON/OFF: Safety - - UL/c UL CAN/CSA-C22.2 No. 60950, File No. E174104 TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL All specifications are typical at nominal input, Vref = 1.25 V, full load at 25˚C unless otherwise stated. Cin, Co1 and Co2 = typical value Embedded Power for Business-Critical Continuity Specifications Continued Output Output current: (See Note 1, page 3) Tracking range for VREF: Tracking tolerance to VREF (VTT - VREF): (over line, load & temperature) Ripple and noise: Load transient response: (See Note 4, page 3) Output capacitance: Non-ceramic values (See Notes 4 & 5, page 3) Ceramic values (See Note 4, page 3) (See Note 6, page 3) PTH03060Y PTH05060Y PTH12060Y PTH03060Y PTH05060Y PTH12060Y ESR (non-ceramic) 470 - - - - - - - - - - - - - - - - - - - - - - - µF typ., 5,500 µF max....