PTV12010L Datasheet | Emerson

12 Vin single output DC-DC CONVERTERS POLA Non-isolated NEW Product 1 - 8 A output current - 12 V input voltage - Wide-output voltage adjust - 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ - Auto-track™ sequencing- - Pre-bias start-up - Efficiencies up to 93% - Output ON/OFF inhibit - Vertical through-hole mounting - Point-of-Load-Alliance (POLA) patible - Undervoltage lockout - Available Ro HS pliant The PTV12010 is a non-isolated dc-dc converter from Artesyn under the Point of Load Alliance (POLA) standard. The vertical mounting option of the PTV12010 module provides performance in less than 20% of the space that is required by alternative solutions. The Auto-Track™ feature provides for sequencing between multiple modules, a function, which is being a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down. The PTV12010 has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ output voltage range with up to 8 A output current, which allows for maximum design flexibility and a pathway for future upgrades. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 100 µF and 10 µF (Ceramic), Cout = 0 µF OUTPUT SPECIFICATIONS Voltage adjustability (See Note 4) Setpoint accuracy Line regulation Load regulation Total regulation Minimum load Ripple and noise 20 MHz bandwidth Suffix ‘W’ Suffix ‘L’ (See Note 8) Suffix ‘W’ Suffix ‘L’ (See Note 8) 1.2-5.5 Vdc 0.8-1.8 Vdc ±2.0% Vo ±10 m V typ. ±12 m V typ. ±3.0% Vo 0A 20 m V pk-pk 15 m V pk-pk ±0.5% Vo EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 PTV12010 2 YEAR WARRANTY SPECIFICATIONS GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Suffix ‘W’ Suffix ‘L’ Approvals and standards Material flammability...