PTV12020W Datasheet | Emerson

12 Vin single output DC-DC CONVERTERS POLA Non-isolated NEW Product 1 - 16 A output current - 12 V input voltage - Wide-output voltage adjust - 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ - Auto-track™ sequencing- - Pre-bias start-up - Efficiencies up to 93% - Output ON/OFF inhibit - Vertical through-hole mounting - Point-of-Load-Alliance (POLA) patible - Undervoltage lockout - Available Ro HS pliant The PTV12020 is a non-isolated dc-dc converter from Artesyn under the Point of Load Alliance (POLA) standard. The vertical mounting option of the PTV12020 module provides performance in less than 20% of the space that is required by alternative solutions. The Auto-Track™ feature provides for sequencing between multiple modules, a function, which is being a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down. The PTV12020 has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’ output voltage range with up to 16 A output current, which allows for maximum design flexibility and a pathway for future upgrades. All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF (non-ceramic) and 22 µF (ceramic), Cout = 0 µF OUTPUT SPECIFICATIONS Voltage adjustability (See Note 4) Setpoint accuracy Line regulation Load regulation Total regulation Minimum load Ripple and noise 20 MHz bandwidth Suffix ‘W’ Vo <2.5 V Suffix ‘W’ Vo >2.5 V Suffix ‘L’ Suffix ‘W’ Suffix ‘L’ (See Note 8) Suffix ‘W’ Suffix ‘L’ Suffix ‘W’ Suffix ‘L’ (See Note 8) 1.2-5.5 Vdc 0.8-1.8 Vdc ±2.0% Vo ±5 m V typ. ±10 m V typ. ±10 m V typ. ±12 m V typ. ±3.0% Vo 0A 1.0% Vo 1.5% Vo 2.0% Vo ±0.5% Vo EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 PTV12020 2 YEAR WARRANTY SPECIFICATIONS GENERAL SPECIFICATIONS Efficiency...