SIL12F-05W3V3-VJ Datasheet | Emerson

SIL12F Series 3.3 Vin to 5 Vin single output DC-DC CONVERTERS F Class Non-isolated NEW Product 1 - Designed to meet ultra fast transient requirements up to 300 A/µs step load transients - 12 A current rating - Input voltage range: 3.0 Vdc to 5.5 Vdc - Output voltage range: 0.9 Vdc to 3.3 Vdc - Extremely low internal power dissipation - Minimal thermal design concerns - Ro HS pliant The SIL12F series is a new range of ultra-pact non-isolated point-of-load converters for space-critical applications. The new SIL12F Typhoon™ family single-inline converter has a footprint of just 38.1 x 8.5 mm - and unlike petitive products on the market, requires only the addition of a small number of ceramic output capacitors to realise a plete high-performance point-of-load (POL) solution. The SIL12F is primarily intended for use on very densely packed, high functionality boards and for powering advanced silicon including network and munication processors, DSPs, FPGAs and ASICs. A key advantage of the SIL12F is that it only needs the addition of five 22 µF ceramic output capacitors to provide a plete fullspecification, high efficiency POL solution with transient response capabilities that extend up to 300 A/µs. The total board space required for the module and capacitors is a mere 400 mm2, facilitating easy co-location with the load. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. External output capacitance required (See Note 4) OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot/undershoot Ripple and noise (See Note 5) Temperature co-efficient Transient response (Vout = 3.3 V) di/dt 300 A/µs 5 Hz to 20 MHz (Trimmable) 0.9-3.3 Vdc ±1.0% typ. ±1.0% typ. ±1.0% typ. ±3.0% typ. 0A None 40 m V pk-pk 25 m V rms ±0.01%/ºC 12 A load step 200 m V deviation 30 µs settling time to within ±1.0% 10% Vo pensation GENERAL SPECIFICATIONS Efficiency Insulation...