SIL15E-12M001J Datasheet | Emerson

Embedded Power for Business-Critical Continuity SMT15E-12M Series Rev.11.15.07 SMT15E_12M 1 of 5 12 Vin single output Total Power: 49.5W Input Voltage: 10-14 Vdc # of Outputs: Single Special Features - 15 A current rating - Input voltage range: 10-14 V - Output voltage range: 0.8-3.63 V - Ultra high efficiency: 92% @ 12 Vin and 3.3 Vout - Built-in I2C™ bus interface provides open-architecture control approach - I2C programmable Features include precision setting of both the output voltage and voltage margining facilities - An Evaluation Kit is available to demonstrate the functionality of the SMT15E12M, including the I2C™ interface capability - 2 year warranty Safety UL/c UL CAN/CSA 22.2 No. TBD UL 60950 File No. TBD The SMT15E-12M significantly extends current non-isolated dc-dc converter power management Features by integrating a programmable active DC output control function. During product development, the converter’s voltage set-point can be programmed - via the built-in I2C™ interface - to a very high degree of accuracy, and the active control function will maintain this setting very precisely during normal operation, by automatically pensating for different load conditions. The same function is used when performing voltage margining during production test, to ensure accurate results and prevent devices being over-stressed. Each converter is supplied pre-programmed to standard default values stored in non-volatile memory and only requires additional programming by customers if they wish to change an operational function. TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to TBD Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.11.15.07 SMT15E_12M 2 of 5 OUTPUT SPECIFICATIONS Voltage adjustability (See Notes 2 and 3) Setpoint accuracy Line regulation Load regulation Total error band Minimum load Overshoot/undershoot...