SIL40C2-00SADJ-VJ Datasheet | Emerson

Features - 40 A current rating - Input voltage range: 4.5-13.8 V - Output voltage: 0.6-5 V - Industry leading value - Cost optimized design - Excellent transient response - Output enable - Output voltage adjustability - Pathway for future upgrades - Supports silicon voltage migration - Resulting in reduced design-in and qual time - Ro HS pliant Output Output voltage Output setpoint accuracy Line regulation Load regulation Min./max. load Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response At turn-on At turn-off See Note 1 See Notes 1, 2 See Note 5 0.1% trim resistors Low line to high line Full load to min. load 0.6-5 V ±1.0% ±0.2% ±0.5% 0 A/40 A 0.5% max. 100 m V max. 25 m V Vin=5 V, Vout=2.5 V 130 m V max. deviation 50 µs recovery to within regulation band 4.5-13.8 Vdc Minimum load Remote OFF See Note 3 Remote ON/OFF 50 m A 5 m A 25 A @ lo max. 3 ms Input Input voltage range Input current Input current (max.) Start-up time Safety UL, c UL CAN/CSA 22.2 No. E139421 UL6950 File No. TBD TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to IEC60950 Embedded Power for Business-Critical Continuity General Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF 12 V @ 40 °C, 100% load Bellcore 332 Vin=5 V, Vo=2.5 V, lo=20 A Fixed 94% 500 k Hz EN60950 UL/c UL6950 UL94V-0 17 g (0.06 oz.) 6,749,409 hours Rev. 07.02.08 SIL40C2 2 of 5 Coplanarity 150 µm Environmental Specifications Thermal performance See Note 5 Operating ambient, temperature Non-operating 0 °C to +70 °C -40 °C to +125 °C Hiccup, non-latching Hiccup, non-latching See Note 6 See Note 7 0 µF 0 µF Protection Short-circuit Overvoltage protection Remended System Capacitance Input capacitance Output capacitance Ordering Information Output Power (Max.) 200 W 200 W 200 W Input Voltage 4.5-13.8 Vdc 4.5-13.8 Vdc 4.5-13.8 Vdc OVP N/A N/A N/A Output Voltage 0.6-5 Vdc 0.6-5 Vdc 0.6-5 Vdc Output Current (Min.) 0A 0A 0A Output...