SMT12F-05W3V3J Datasheet | Emerson

Embedded Power for Business-Critical Continuity SMT12F Series 3.3 Vin and 5 Vin single output Rev.06.27.07 SMT12F 1 of 5 Total Power: 31.2W Input Voltage: 2.97-3.63 Vdc # of Outputs: Single Special Features - Designed to meet ultra fast transient requirements up to 300 A/μs step load transients - 12 A current rating - Input voltage range: 2.97 Vdc to 5.5 Vdc - Output voltage range: 0.9 Vdc to 3.3 Vdc - Extremely low internal power dissipation - Minimal thermal design concerns - Ideal solution where board space is at a premium or tighter card pitch is required - Available Ro HS pliant - 2 year warranty Safety UL/c UL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TÜV Product Service (EN60950) Certificate No. B 04 04 38572 041 CB Report and Certificate to IEC60950 DE3-52484 The SMT12F series is a new range of ultra-pact non-isolated point-of-load converters for space-critical applications. The new SMT12F Typhoon™ family surface-mount converter has a footprint of just 13.5 x 16 mm - and unlike petitive products on the market, requires only the addition of a small number of ceramic output capacitors to realise a plete high-performance point-of-load (POL) solution. The SMT12F is primarily intended for use on very densely packed, high functionality boards and for powering advanced silicon including network and munication processors, DSPs, FPGAs and ASICs. A key advantage of the SMT12F is that it only needs the addition of five 22 μF ceramic output capacitors to provide a plete full-specification, high efficiency POL solution with transient response capabilities that extend up to 300 A/μs. The total board space required for the module and capacitors is a mere 300 mm2, facilitating easy co-location with the load. Embedded Power for Business-Critical Continuity Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated. Rev.06.27.07 SMT12F 2 of 5 OUTPUT SPECIFICATIONS Voltage adjustability Wide...