SMT40C2-00SADJJ Datasheet | Emerson

SIL40C2 Series DC-DC CONVERTERS C Class Non-isolated 4.5-13.8 Vin Single Output March 15, 2006 1 NEW Product - 40 A current rating - Input voltage range: 4.5-13.8 V - Output voltage: 0.6-5 V - Industry leading value - Cost optimized design - Excellent transient response - Output enable - Output voltage adjustability - Pathway for future upgrades - Supports silicon voltage migration - Resulting in reduced design-in and qual time - Ro HS pliant The SIL40C2 series is a new high density open frame non-isolated converter for space sensitive applications. This model has a wide input range (4.5-13.8 Vdc) and offers a wide 0.6-5 V output voltage range with 40 A load capability. An external resistor adjusts the output voltage from its pre-set value of 0.6 V to any value up to the 5 V maximum. Typical efficiencies for the models are 91% for the 12 V input version. The SIL40C2 series offers remote ON/OFF and over-current protection as standard. 2 year warranty All specifications are typical at nominal input, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS Output voltage Output setpoint accuracy Line regulation Load regulation Min/max load Overshoot Undershoot Ripple and noise 5 Hz to 20 MHz Transient response At turn-on At turn-off (See Note 1) (See Notes 1, 2) (See Note 5) 0.1% trim resistors Low line to high line Full load to min. load 0.6-5 V ±1.0% ±0.2% ±0.5% 0 A/40 A 0.5% max. 100 m V max. 25 m V Vin = 5 V, Vout = 2.5 V 150 m V max. deviation 30 µs recovery within regulation band Coplanarity ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 5) GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF 12 V @ 40 °C 100% load Bellcore 332 SPECIFICATIONS Vin=5 V, Vo=2.5 V, lo=20 A Fixed 94% Typ. 500 k Hz EN60950 UL/c UL60950 UL94V-0 17 g/0.06 oz. 6,749,409 hours 150 µm INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Start-up time...