iMP8 Datasheet | Emerson

Features - Full Medical EN60601 approval - Intelligent I2C control - Voltage adjustment on all outputs (Manual or I2C) - Configurable input and output (case and module) OK signals and indicators - Configurable inhibit/enable - Configurable output UP/DOWN sequencing - Configurable current limit (foldback or constant current) - High power density (8.8 W/cu-in) - Intelligent fan (speed control/fault status) - Downloadable GUI from website - Customer provided air option - u P controlled PFC input with active inrush protection - I2C monitor of voltage, current, and temp - Programmable voltage, current limit, inhibit/enable through I2C - Optional extended hold-up module (SEMI F47 pliance) - Increased power density to 50% over standard MP - External switching frequency sync input - Optional conformal coating - Industrial temp range (-40 ºC to 70 ºC) - No preload required - Industrial shock/vibration (>50G’s) Electrical Specifications Input Input ra­nge: Frequency: Inrush current: Efficiency: Power Factor: Turn-on time: EMI filter: Leakage current: Radiated EMI: Holdover storage: 5-264 Vac 120-350 Vdc 8 (limited to 300 Vdc in medical applications) 47-440 Hz 40 A peak max. (soft start) Up to 85% @ full case load 0.99 typ. meets EN61000-3-2 (n/a @ 440 Hz) AC on 2.0 sec typ., inhibit/enable 150ms typical Programmable delay; 50ms internal turn-on delay (Dual Output only) CISPR 22/EN55022 Level “B” 300µA max. @ 240 Vac; 47 - 63 Hz CISPR 22/EN55022 Level “B” 20 ms minimum (independent of input Vac) additional 34ms holdover storage with optional HUP module (SEMI F47 patible). For i MP4 15 ms (low-line), 10 ms (high-line) 5 ms early warning min. before outputs lose regulation > Full cycle ride thru (50 Hz) (n/a on i MP4> 750 W @ 90 Vac) Meets EN61000-3-2 Meets EN60950 and EN60601 i MP4: 16 A; i MP8: 20 A; i MP1: 25 A (both lines fused) 2 years AC OK: Harmonic distortion: Isolation: Input fuse (internal): Warranty: Global Inhibit/Enable: TTL, Logic “1” and...