EP5388QI Datasheet | Enpirion

Overview The EP5388QI is a synchronous buck converter with integrated Inductor, PWM controller, MOSFETS, and pensation providing the smallest possible solution size. The EP5388QI requires only two small MLCC capacitors to make a plete solution. Integration of the inductor greatly simplifies design, contains noise, reduces part count, and reduces solution footprint. Low output ripple ensures patibility with RF systems. The EP5388QI operates at a switching frequency of 4 MHz, enabling this unprecedented level of integration and small external ponents. Type III voltage mode control is used to provide high noise immunity and wide control loop bandwidth. The small footprint makes this part ideal for space constrained portable applications. Shutdown current of <1u A extends battery life Output voltage level is programmed via a 3-pin VID selector providing seven pre-programmed output voltages along with an option for external resistor divider. Product Highlights Featuring Integrated Inductor Technology Applications - - - - - - Noise Sensitive RF Applications Area Constrained Applications Wireless Data Applications Portable Gaming Devices Personal Media Players Advanced Mobile Processors, DSP, IO, Memory, Video, Multimedia Engines - 3mm x 3mm x 1.1mm QFN package - Only two low cost MLCC caps required - 4 MHz switching frequency - High efficiency, up to 94% - Up to 800m A continuous output current - Wide 2.4V to 5.5V input range - VOUT range 0.6V to VIN - 0.5V - 3-Pin VID output voltage programming - 100% duty cycle capable - Less than 1 µA standby current - Low VOUT ripple for RF patibility - Short circuit and over current protection - UVLO and thermal protection - Ro HS pliant; MSL 3 260°C reflow Typical Application Circuit ENABLE 4.7µF 0603 VSense Vout VOUT 47u F 1206 Vin VS0 VS1 VS2 Ordering Information Part Number Temp Rating (°C) Package Voltage Select EP5388QI-T EP5388QI-E -40 to +85 16-pin QFN T&R EP5388QI Evaluation Board Figure 1....