EN25QH32 Datasheet | Elite Semiconductor Microelectronics Technology

EN25QH32 32 Megabit Serial Flash Memory with 4Kbyte Uniform Sector Features - Single power supply operation - Full voltage range: 2.7-3.6 volt - Serial Interface Architecture - SPI patible: Mode 0 and Mode 3 - 32 M-bit Serial Flash - 32 M-bit/4,096 K-byte/16,384 pages - 256 bytes per programmable page - Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO, WP#, HOLD# - Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD# - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 - High performance - 104MHz clock rate for Standard SPI - 80MHz clock rate for two data bits - 50MHz clock rate for four data bits - Low power consumption - 12 m A typical active current - 1 μA typical power down current - Uniform Sector Architecture: - 1024 sectors of 4-Kbyte - 64 blocks of 64-Kbyte - Any sector or block can be erased individually - Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin - High performance program/erase speed - Page program time: 1.3ms typical - Sector erase time: 90ms...