EN25P32
Overview
The EN25P32 is a 32M-bit (4096K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction.
- Single power supply operation - Full voltage range: 2.7-3.6 volt
- 32 M-bit Serial Flash - 32 M-bit/4096 K-byte/16384 pages - 256 bytes per programmable page
- High performance - 100MHz clock rate
- Low power consumption - 5 mA typical active current - 1 μA typical power down current
- Uniform Sector Architecture: - Sixty four 64-Kbyte sectors
- Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin
- High performance program/erase speed Byte program time: 7µs typical Page program time: 1.5ms typical Sector erase time: 800ms typical Chip erase time: 25 Seconds typical
- Lockable 512byte OTP security sector
- Minimum 100K endurance cycle
- Package Options 16 pins SOP 300mil body width 8 pins SOP 200mil body width 8 contact VDFN All Pb-free packages are RoHS compliant
