EV-2101CA Datasheet | Epson Company

.. Crystal oscillator VOLTAGE CONTROLLED SAW OSCILLATOR Product number (please refer to page 4) Q3831CA0xxxxx00 - - - - - - - - 3.3 V operating voltage, Differential LV-PECL / LVDS output. Generates high frequency clock with fundamental mode. Very low jitter and low phase noise. Ceramic package with 2.0 mm Max. thickness. Excellent environmental capability. Low current consumption due to use of CMOS technology. Available for lead (Pb)-free soldering. plete lead (Pb)-free product. Actual size  Specifications (characteristics) Item Symbol Specifications LV-PECL LVDS 77.760 MHz to 700.0000 MHz -0.5 V to +4.0 V 3.3 V ±0.3 V -40 °C to +100 °C R : -5 °C to +85 °C, M :-40 °C to +85 °C as per below table 100 k Hz Typ. 70 m A Typ. 35 m A Typ. 6 m A Typ. 45 % to 55 % 2.35 V Typ. (VCC -1.03 to VCC -0.88) - 1.60 V Typ. (VCC -1.81 to VCC -1.62) - - 247 m V to 454 m V - 50 m V - 1.125 V to 1.375 V - 150 m V 50 Ω 100 Ω 0.7 VCC Min. 0.3 VCC Max. 400 ps Max. 400 ps Max. 10 ms Max. 200 x 10-6 / V Typ. 250 x 10-6 / V Typ. 1 ps Max. 1 ps Max. Remarks Please contact us for inquiries about the available frequency Output frequency range f0 Max. supply voltage VCC-GND Power source voltage Operating voltage VCC Storage temperature TSTG Temperature range Operating temperature TOPR Absolute Pull Range APR Modulation Bandwidth BW Current consumption Iop Output disable current IOE Duty tw/ t VOH VOL VOD Output voltage ΔVOD VOS ΔVOS Output load condition (fan out) RL VIH Output enable disable input voltage VIL Output rise time t R Output fall time t F Oscillation start up time t OSC Gain transfer Phase jitter Kv t PJ Stored as bare product after unpacking VC = 0.15 V to 3.0 V ∗1 Flat to ±3 d B Typ. OE = VCC OE = GND at outputs crossing point DC characteristics Differential output, DC characteristics Output change, DC characteristics Offset Offset change ____ LV-PECL: Terminated to VCC -2.0 V / LVDS: Connected between OUT - OUT LV-PECL: 20 % → 80 % of (VOH - VOL) / LVDS: 20 % → 80 % of...