Datasheet4U.com

24C08 Datasheet PDF

Estek Electronics 24C08

The 24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects and can be connected to ground. The 24C16 does not use the device address pins, which limits the number of devices on a single bus to one.
Part No. 24C08
Datasheet 24C08 Download
Manufacturer
Estek Electronics
Description 8-lead SOP and 8-lead TSSOP
Buy Stock & Price
24C08 datasheet page 1 preview

FEATURES

¡Wide Voltage Operation ¡ C to +85£ ¡C ¡Operating Ambient Temperature: -40£ ¡Internally Organized: - 24C02, 256 X 8 (2K bits) - 24C04, 512 X 8 (4K bits) - 24C08, 1024 X 8 (8K bits) - 24C16, 2048 X 8 (16K bits) - VCC = 1.8V to 5.5V ¡1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility ¡Write Protect Pin for Hardware Data Protection ¡8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes ¡Partial Page Writes Allowed ¡Self-timed Write Cycle (5 ms max) ¡High-reliability - Endurance: 1 Million Write Cycles - Data Retention: 100 Years ¡Two-wire Serial Interface ¡Schmitt Trigger, Filtered Inputs for Noise Suppression ¡Bidirectional Data Transfer Protocol

GENERAL DESCRIPTION

The ¡8-lead PDIP, 8-lead SOP and 8-lead TSSOP Packages ¡Die Sales: Wafer Form, Waffle Pack 24C02/ 24C04/ 24C08/ 24C16 provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.
24C08 page 2 preview 24C08 page 3 preview