Datasheet4U Logo Datasheet4U.com

EUA5212 - Stereo Audio Power Amplifier

General Description

Tap to voltage divider for internal mid-supply bias generator Bit 0 of gain control Bit 1 of gain control Ground connection for circuitry.

Connected to thermal pad.

Key Features

  • z z z z z z z z z 2W per Channel Output Power Into 3-Ω Load Internal Gain Control, Which Eliminates External Gain-Setting Components Input MUX Select Terminal PC-Beep Input Depop Circuitry Integrated Two Input Modes Allowable with Single-Ended or Fully Differential Input Low Supply Current and Shutdown Current Thermal Shutdown Protection TSSOP-24 with Thermal Pad.

📥 Download Datasheet

Datasheet Details

Part number EUA5212
Manufacturer EuTech
File Size 608.04 KB
Description Stereo Audio Power Amplifier
Datasheet download datasheet EUA5212 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUA5312 2-W Stereo Audio Power Amplifier Eutech Microelectronics
EUA2005 1.5-W Mono Filterless Class-D Audio Power Amplifier Eutech Microelectronics
EUA2008 3-W Stereo Class-D Audio Amplifier Eutech Microelectronics
EUA2011 3-W Mono Filterless Class-D Audio Power Amplifier Eutech Microelectronics
EUA2011A 2.5-W Mono Filterless Class-D Audio Power Amplifier Eutech Microelectronics

Other Datasheets by EuTech

Part Number Description
EUA5202 Stereo Audio Power Amplifier
EUA5544 Class AB Stereo Headphone Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com EUA5212 2-W Stereo Audio Power Amplifier with Four Selectable Gain Settings DESCRIPTOIN The EUA5212 is a stereo audio power amplifier. When driving 1 W into 8-Ω speakers, the EUA5212 has less than 0.8% THD+N across its specified frequency range. Included within this device is integrated depop circuitry that virtually eliminates transients that cause noise in the speakers. Amplifier gain is internally configured and controlled by way of two terminals (GAIN0 and GAIN1). BTL gain settings of 6dB, 15.5dB, 21.5dB and 27.6dB are provided, while SE gain is always configured as 0dB for headphone drive. An internal input MUX allows two sets of stereo inputs to the amplifier .