EUM6867QIR1 Datasheet | Eutech Microelectronics

Preliminary EUM6867 PWM Pre Driver for DC Fan Motor DESCRIPTION EUM6867 is a pre driver for single coil brushless DC motor, specially designed for 12V power supply application. With an external PWM input signal, EUM6867 can control the speed of DC motor. It is an interface between a HALL IC and a single coil motor. The functions built in EUM6867 include soft start mode, PWM control mode, minimum speed mode, soft-switching time, fan tachometer, lock protection, auto restart, Hall Bias and current limiter. PWM mode controls the external PMOS-NMOS FET in low noise and low vibration. With soft start function. EUM6867 can drive motor from slow speed to fast speed in a settable time by setting the external capacitor between S-S and 5VREG. Minimum speed mode makes the lowest speed of motor settable. Soft-switching time can cut the ineffective current when phase change is not set. If the motor is stalled by external force or obstacles, overdrive current may incur coil overheat/burning. To prevent this, lock protection circuit can shut down the external power devices for a few seconds after motor lockup. Then auto restart circuit will try to power up these devices. The protection and power up time are settable by an external capacitor. EUM6867 has FG output. VÛm w`R - yÑb € Features z z z z z z z z z z Single-phase full-wave Pre Driver PWM Control Mode Soft Start Function Soft-Switching Time Minimum Speed Settable Lock Protection and Auto Restart FG Output Current Limit Protection Available in TSSOP-16 Package Ro HS pliant and 100% Lead (Pb)-Free APPLICATIONS z Personal puter’s Power Supply Radiation and CPU Cooler Application Circuit ww w.g ofot ech. Figure 1. DS6867 Ver0.1 Nov. 2007 N~- NãtÿmñW3^VÛmw`R- yÑb€g- PQl Sø Tel: 0755-8398 3377 / 135 9011 2223 http://.gofotech. Preliminary Pin Configurations EUM6867 Pin Configurations Package Type TSSOP-16 Pin Description PIN OUT2P OUT2N VCC SENSE RMI VTH CPWM FG ININ+ CT S-S 5VREG SGND OUT1N OUT1P...