EUP2586 Datasheet | Eutech Microelectronics

Small Package, High Performance, Asynchronies Boost for WLED Driver DESCRIPTION The EUP2586 is a high frequency, asynchronous boost converter designed for driving white LED arrays. With integrated 0.19Ω power switch and 2A current limit, the EUP2586 provides enough driving capability for 7”~10” LCD backlighting(13 strings of 3 or 4 LEDs each). The device uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 200m V feedback voltage reduces power loss and improves efficiency. With the built-in over-voltage protection function (OVP), the SW pin monitors the output voltage and turn off the device if an over-voltage condition is present due to an open circuit condition. Other Features include soft start, over-current limiting, thermal protection and under-voltage lockout. The EUP2586 is available in the tiny TSOT23-5 package to provide the best solution for PCB space saving and total BOM cost. Features 2.6V to 5.5V Input Range Internal 0.19Ω, 18V MOSFET Switch High Efficiency Up to 93% Lower Surface Temperature at ILED=180m A 1MHz Switching Frequency 2A Current Limit Open LED Overvoltage Protection Internal Soft-Start PWM and DC Dimming Control Available in TSOT23-5 Package Ro HS pliant and 100% Lead (Pb)-Free Halogen-Free APPLICATIONS 7” to 10” LCD Panels MID Backlighting Netbook Backlighting Portable Media Players GPS Navigation Systems Typical Application Circuit Figure 1. EUP2586 PWM Dimming Application for White LED Driver DS2586 Ver1.0 Feb. 2012 Block Diagram Pin Configurations Package Type TSOT23-5 Figure 2. Block Diagram Pin Configurations Pin Description PIN TSOT23-5 DESCRIPTION Switch Pin. This is the drain of the internal power switch. Connect inductor/diode here. Minimize trace area at this pin to reduce EMI. mon Ground. Connect the pin to ground plane. Feedback Pin. Reference voltage is 200m V....