EUP2619 Datasheet | Eutech Microelectronics

Preliminary TFT LCD DC-DC Converter with Integrated Charge Pumps and OP-AMP DESCRIPTION The EUP2619 generates power supply rails for thin-film transistor (TFT) liquid-crystal display (LCD) panels in tablet PCs and notebooks operated from 2.5V to 5.5V input supply. The device integrates a step-up converter, positive and negative charge pumps, and a high speed V buffer. The external pensated step-up converter, providing the regulated supply voltage for the panel source driver ICs, Features an internal power MOSFET and high frequency operation allowing to use small inductors and capacitors. The step up converter uses fixed-frequency peak current mode control architecture which provides fast load-transient response and easy pensation. A 2.8A peak current limit for the internal switch protects power supply fault condition. The regulated positive and negative charge pump regulators generate the positive and negative supply rails for the TFT LCD gate resistive voltage-divider ICs. The high speed V buffer Features 500m A short circuit current, 20MHz bandwidth, fast slew rate 45V/µs, and rail-to-rail inputs and outputs. The EUP2619 includes internal power-up sequencing, yb R ‘ over/under voltage protections of the boost w converter, and over temperature protection to ensure V inm safe operating. om c . The EUP2619 are available in a 16-pin 3mm × 3mm TQFN ech t packages. o f Features 2.5V to 5.5V Input Supply Range 1.2MHz Current-Mode Step-Up Converter - Built-In 20V/2.8A, 0.16Ω N-Channel MOSFET - High Efficiency Up to 90% - ±1% Accurate Output Voltage - Fast Transient Response to Pulse Load - Over-Current Protection - Output Under-Voltage Protection 600k Hz Negative Charge Pump Driver for VGL 600k Hz Positive Charge Pump Driver for VGH High Speed High Current 18V V Buffer - ±500m A Output Short-Circuit Current - 45V/µs Slew Rate - 20MHz, -3d B Bandwidth - Rail-to-Rail Input and Output Power-On Sequence Control Thermal-Overload Protection 3mm × 3mm...