Datasheet4U Logo Datasheet4U.com

EUP3406 - 600mA Synchronous Step-Down Converter

General Description

The EUP3406 is a constant frequency, current mode, PWM step-down converter.

The device integrates a main switch and a synchronous rectifier for high efficiency.

Key Features

  • z z z z z z z z z z z z z High Efficiency 1.5MHz Constant Switching Frequency 600mA Available Load Current 270µA Typical Quiescent Current 2.5V to 5.5V Input Voltage Range Adjustable Output Voltage as Low as 0.6V 100% Duty Cycle Low Dropout Operation No Schottky Diode Required Short Circuit and Thermal Protection Over Voltage Protection ¡Õ 1µA Shutdown Current Available in SOT23-5 Package RoHS Compliant and 100% Lead(Pb)-Free.

📥 Download Datasheet

Datasheet Details

Part number EUP3406
Manufacturer Eutech Microelectronics
File Size 766.60 KB
Description 600mA Synchronous Step-Down Converter
Datasheet download datasheet EUP3406 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3401 Synchronous Step-Down Converter
EUP3402 2.25MHz Synchronous Step-Down DC/DC Regulator
EUP3408 800mA Synchronous Step-Down Converter
EUP3409 800mA Synchronous Step-Down Converter
EUP3410 380KHz Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3406 1.5MHz, 600mA Synchronous Step-Down Converter DESCRIPTION The EUP3406 is a constant frequency, current mode, PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency. The 2.5V to 5.5V input voltage range makes the EUP3406 ideal for powering portable equipment that runs from a single cell Lithium-Ion (Li+) battery or 3-cell NiMH/ NiCd batteries. The output voltage can be regulated as low as 0.6V. The EUP3406 supports up to 600mA load current and can also run at 100% duty cycle for low dropout applications, extending battery www.DataSheet4U.com life in portable systems. Switching frequency is internally set at 1.5MHz, allowing the use of small surface mount inductor and capacitors.