EUP3504 Datasheet | Eutech Microelectronics

1.8A Line Switch with Low On-Resistance DESCRIPTION The EUP3504 is a low dropout line switch IC with ON/OFF control and output current protection which integrates a P-channel MOSFET. By connecting the EUP3504 to the output pin of a step-down DC/DC converter, the EN pin controls ON/OFF for each distribution switch to deliver power per requirements and maximize total power efficiency. As a result, the EUP3504 helps to extend battery life and product operation time. The EUP3504 contains a current limit protection circuit so these are not required externally unlike discrete circuit solutions where MOSFETs and resistors are used. Externally programmable soft-start allows for proper power on sequencing with respect to other power supplies and avoids input inrush current during startup. When a low signal is input to the EN pin, the IC enters shutdown mode. Even where a load capacitor is connected to the output pin during shutdown, the electric charge stored at the load capacitor is discharged through the internal switch. As a result, the VOUT pin voltage falls quickly to the GND level. The EUP3504 contains thermal shutdown protection. Features 3.3V to 13.5V Input Voltage Range 110mΩ On Resistance Low 90µA Quiescent Current Low Shutdown Current：<4µA ON/OFF Control Function Externally Programmable Current Soft-Start High Speed Auto Discharge Function Operating Temperature Range: -40°C ~+85°C 2.35A Output Current Limit Thermal Shutdown Ro HS pliant and 100% Lead (Fb)-Free Halogen-Free APPLICATIONS Portable Equipment Laptop, Palmtops, Notebook puters LCD Monitor TV Typical Application Circuit DS3504 Ver1.1 Oct. 2013 Figure 1. Block Diagram Pin Configurations Package Type Figure 2. Pin Configurations SOT23-5 Pin Description SOT23-5 VOUT DESCRIPTION Soft-start control. Connect a capacitor from SS to GND to set the soft-start period. See Soft-start Capacitor. Ground. Connect a 10Ω resistor from GND pin...