Datasheet4U Logo Datasheet4U.com

EUP3511 - 1 Amp Current Limited Load Switch

Download the EUP3511 datasheet PDF. This datasheet also covers the EUP3510 variant, as both devices belong to the same 1 amp current limited load switch family and are provided as variant models within a single manufacturer datasheet.

General Description

The EUP3510/3511 are Current Limited P-channel MOSFET power switches designed for high-side loadswitching applications.

The internal current-limiting circuit protects the input supply against large output short circuit current which may cause the supply to fall out of regulation.

Key Features

  • include thermal shutdown to prevent catastrophic switch failure from high current loads, under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present. The EUP3510/3511 are available in 5 pin SOT-23 packages.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (EUP3510-EutechMicroelectronics.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number EUP3511
Manufacturer Eutech Microelectronics
File Size 246.83 KB
Description 1 Amp Current Limited Load Switch
Datasheet download datasheet EUP3511 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP3510 1 Amp Current Limited Load Switch
EUP3502A 1.5A Line Switch
EUP3504 1.8A Line Switch
EUP3507 600mA Line Switch
EUP3542 Dual Power-Distribution Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EUP3510/3511 1 Amp Current Limited Load Switch DESCRIPTION The EUP3510/3511 are Current Limited P-channel MOSFET power switches designed for high-side loadswitching applications. The internal current-limiting circuit protects the input supply against large output short circuit current which may cause the supply to fall out of regulation. The current limit threshold is programmed with an external resistor from SET Pin to ground. The quiescent supply current is typically 8µA, making the device ideal for portable battery-operated equipment. In shutdown mode, the supply current decreases to less than 0.1µA.