EUP7903 - 300mA High PSRR LDO Regulators

Datasheet Summary

Description

The EUP7903 is a high current, low-dropout (LDO) linear regulator with fast transient response and high PSRR.

It offers high output accuracy, extremely low dropout voltage, low quiescent current and fast start-up time.

Features

include over-current protection, thermal shutdown. The device is available in the small SOT23-5 package.

Eutech Microelectronics

📥 Download Datasheet

Datasheet Details

Part number	EUP7903
Manufacturer	Eutech Microelectronics
File Size	346.51 KB
Description	300mA High PSRR LDO Regulators
Datasheet	EUP7903 Datasheet
Additional preview pages of the EUP7903 datasheet.

📁 Similar Datasheet

EUP7998 - Sink/Source DDR Termination Regulator (Eutech)
EUP3427 - Synchronous Step-Down Converter (Eutech)
EUP3618 - Charge Pump Flash LED Driver (Eutech)
EUP8090 - 1A Linear Li-Ion/Polymer Charger IC (Eutech)

Other Datasheets by Eutech Microelectronics

EUP7905 - 600mA High PSRR Low Dropout Linear Regulator
EUP7907 - 600mA High PSRR Low Dropout Linear Regulator
EUP7907A - 600mA Low Noise High PSRR Low Dropout Linear Regulator
EUP7910A - 3.3V 600mA Low-Dropout Regulator
EUP7913 - 300mA Low-Noise LDO Without Bypass Capacitor
EUP7913A - 300mA Low-Noise LDO Without Bypass Capacitor
EUP7914 - 150mA Low-Noise LDO
EUP7915 - 150mA Low-Noise LDO

Full PDF Text Transcription

Click to expand full text

EUP7903 300mA High PSRR LDO Regulators DESCRIPTION The EUP7903 is a high current, low-dropout (LDO) linear regulator with fast transient response and high PSRR. It offers high output accuracy, extremely low dropout voltage, low quiescent current and fast start-up time. The EUP7903 is designed to work with low-ESR ceramic capacitors, reducing the amount of the PCB area necessary for power applications. Only a 1uF ceramic output capacitor can make the device stable over the whole load range. EUP7903 can be externally set either fixed output mode or adjustable output mode. Connect FB pin to GND to select the fixed output mode. Its output is one of pre-set values: 1.25V~5V (50mV per step).

Published: Jul 18, 2014 |