Datasheet4U Logo Datasheet4U.com

EUP8060X - 1A Li-Ion/Polymer Charger IC

Description

The EUP8060X series are highly integrated single cell Li-Ion/Polymer battery charger IC designed for handheld devices.

The EUP8060X integrates internal power FET, current sensor, charge status, reverse current protection and overvoltage protection (OVP) in a single monolithic devices.

Features

  • z z z z z z z z z z z z z Programmable Charge Current up to 1A ± 1% Voltage Regulation Accuracy Thermal Regulation to Maximize Charge Rate Input Overvoltage Protection: 6.6V and 11V Options Charge Termination by Minimum Current and Time Precharge Conditioning with Safety Timer Status Outputs to Indicate Charge, Fault, and Power good Outputs Reverse Leakage Protection Prevents Battery Drainage Short-Circuit and Thermal Protection Automatic Sleep Mode for Low Power Consumption LDO Mode Operation f.

📥 Download Datasheet

Datasheet Details

Part number EUP8060X
Manufacturer Eutech Microelectronics
File Size 961.97 KB
Description 1A Li-Ion/Polymer Charger IC
Datasheet download datasheet EUP8060X Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EUP8090 1A Linear Li-Ion/Polymer Charger IC Eutech
EUP3427 Synchronous Step-Down Converter Eutech
EUP3618 Charge Pump Flash LED Driver Eutech
EUP7998 Sink/Source DDR Termination Regulator Eutech

Other Datasheets by Eutech Microelectronics

Part Number Description
EUP8010X Linear Li-Ion/Polymer Charger IC
EUP8020X Dual Source AC/USB Li-Ion/Polymer Charger IC
EUP8051 Low Cost 1A Linear Battery Charge Controllers
EUP8051A Low Cost 1A Linear Battery Charge Controllers
EUP8054 Standalone Linear Li-Ion Battery Charger

Full PDF Text Transcription

Click to expand full text
EUP8060X 1A Li-Ion/Polymer Charger IC with Thermal Regulation and OVP DESCRIPTION The EUP8060X series are highly integrated single cell Li-Ion/Polymer battery charger IC designed for handheld devices. The EUP8060X integrates internal power FET, current sensor, charge status, reverse current protection and overvoltage protection (OVP) in a single monolithic devices. When AC-adapter is applied, an external resistor sets the magnitude of the charge current, which may be programmed up to 1A. Thermal feedback also regulates the charge current to limit the die temperature when fast charging or while exposed to high ambient temperature. The EUP8060X charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current.
Published: |