EUP8218 Datasheet | Eutech Microelectronics

Preliminary 2A Single Cell Switchmode Li-Ion/Polymer Battery Charger with System Power-Path Selection and Automatic USB/Charger Detection DESCRIPTION The EUP8218 is a highly integrated single cell Li-ion and Li-polymer battery charger. It integrates a constantfrequency PWM controller with high accuracy regulation of input current, charge current, and voltage. It also provides battery detection, pre-conditioning, charge termination, and charge status monitoring. The EUP8218 provides power path selection function. When the qualified adapter is present, the system is powered by the adapter. Otherwise, the system is powered by the battery. It also integrates an USBconnection-monitoring device used to determine if a standard USB device or a battery-charging device is connected. The EUP8218 charges the battery in three phases: pre-conditioning, fast-charge constant current and constant voltage. In all stages, an internal control loop monitors the IC junction temperature and reduce charge current if the internal temperature threshold (120°C) is exceeded. Additionally, a battery pack thermistor monitoring input (TS) is included that monitors battery temperature for safety charging. Charge is terminated when the current reaches 10% of the fast charge rate. A programmable charge timer offers a safety back up. The EUP8218 automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low-quiescent current sleep mode when the input voltage falls below the battery voltage. The EUP8218 Features Dynamic Power Management (DPM) to reduce the charge current when the input power limit is reached to avoid over-loading the adapter. A highly-accurate current-sense amplifier enables precise measurement of input current from adapter to monitor overall system power. The EUP8218 is available in a 28-pin, 4mm × 4mm TQFN package. Features 4.5V-20V Input Operating Range High Integration - Automatic Power Path Selector Between Adapter...