IR333-A
IR333-A is 5mm Infrared LED manufactured by Everlight.
Features
:
High radiant intensity Peak wavelength p=940nm View angle 20 High reliability 2.54mm Lead spacing
Description
:
EVERLIGHT’s Infrared Emitting Diode (IR333-A) is a high intensity diode, molded in a blue transparent plastic package. The device is spectrally matched with phototransistor, photodiode and infrared receiver module.
Applications :
Free air transmission system Optoelectronic switch Floppy disk drive Infrared applied system Smoke detector w w w
.d at h s a t e e
. u 4 m o c
CHIP MATERIAL Ga Al As LENS COLOR Blue
PART NO.
..
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : ECN : DIR-033-004 REV : 1.3 PAGE : 2/8
5mm Infrared LED
MODEL NO : IR333-A
Package Dimensions :
Notes :
1.All dimensions are in millimeter. 2.Protruded resin under flange 1.5 mm Max. 3.Lead spacing is measured where the lead emerge from the package. 4.Lens color Blue tranaparent. 5.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 6.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 7.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not ply with the absolute maximum ratings and the instructions included in these specification sheets.
EVERLIGHT ELECTRONICS CO., LTD.
DEVICE NUMBER : ECN : DIR-033-004 REV : 1.3 PAGE : 3/8
5mm Infrared LED
MODEL NO : IR333-A
Absolute Maximum Ratings at TA = 25 Parameter Symbol Rating Continuous Forward Current Peak Forward Current Pulse width=100s, Duty cycle=1 Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Power Dissipation at(or below) 25Free Air Temperature IF IFP VR...
