ITR9606-F Datasheet | Everlight

Technical Data Sheet Opto Interrupter - Features ․Fast response time ․High analytic ․Cut-off visible wavelength λp=940nm ․High sensitivity ․Pb free ․This product itself will remain within Ro HS pliant version - Descriptions ․The ITR9606-F consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, ․The phototransistor receives radiation from the IRED only .This is the normal situation. ․But when an object is in between , phototransistor could not receives the radiation. ․For additional ponent information , please refer to IR928-6C-F and PT928-6C-F - Applications ․Mouse Copier ․Switch Scanner ․Floppy disk driver ․Non-contact Switching ․For Direct Board - Device Selection Guide Device No. IR928-6C-F PT928-6C-F Chip Material Ga Al As Silicon LENS COLOR Water clear Water clear Everlight Electronics Co., Ltd. Device No：CDRX-096-014 http:\.everlight. Prepared date：2006/12/27 Rev 1 Page: 1 of 7 Prepared by：Kunjiang Xie - Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent 6.When using this product , please observe the...