PHE426 Datasheet | Evox

.. - Single metallized film pulse capacitor, polypropylene dielectric - According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency applications demanding stable operation. CONSTRUCTION Polypropylene film capacitor with vacuum evaporated aluminum electrodes. Radial leads of tinned wire are electrically welded to the contact metal layer on the ends of the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. H 0.5 p ∅d b l TECHNICAL DATA Rated voltage UR, VDC Rated voltage UR, VAC Capacitance range, µF 100 63 0.001 - 0.15 250 160 0.001 - 20 300 160 0.033 - 12 400 220 0.001 - 6.8 630 250 0.001 - 3.9 1000 250 0.0033 - 1.5 5.0 7.5 10.0 15.0 22.5 27.5 37.5 p ± ± ± ± ± ± ± 0.4 0.4 0.4 0.4 0.4 0.4 0.5 d 0.5 0.6 0.6 0.8 0.8 0.8 1.0 std I max I 5-1 5-1 5-1 6-1 6-1 6-1 6-1 30 30 30 30 30 30 30 b ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.7 Capacitance values Capacitance tolerance Category temperature range Rated temperature Voltage derating In accordance with IEC E12 series ±5%, other tolerances on request - 55 ... +105°C +85°C The rated voltage is decreased with 1.3%/°C between +85°C and +105°C. IEC 60068-1, 55/105/56/B Category B according to IEC 60065 d U/dt according to article table For peak to peak voltages lower than rated voltage (UPP < UR), the specified d U/dt can be multiplied by the factor UR/UPP. - 200 (+50, - 100) ppm/°C (at 1 k Hz) Approximately 6 n H/cm for the total length of capacitor winding and the leads. Maximum values at +23°C C ≤ 0.1 µF 0.1µF < C ≤ 1.0 µF C > 1.0 µF 1 k Hz 0.05% 10 k Hz - 100 k Hz 0.25% 0.05% 0.10% - 0.10% - - Climatic category Passive flammability Maximum pulse steepness: Temperature coefficient Self-inductance Dissipation factor tanδ Insulation resistance Measured at +23°C, 100 VDC 60 s for UR < 500 VDC and at 500 VDC for UR ≥ 500 VDC Between terminals: C ≤ 0.33 µF: ≥ 100 000 MΩ C > 0.33 µF: ≥ 30 000...