Datasheet4U Logo Datasheet4U.com

XR16M2650 - HIGH PERFORMANCE LOW VOLTAGE DUART

General Description

The XR16M26501 (M2650) is a high performance dual universal asynchronous receiver and transmitter (UART) with 32 bytes TX and RX FIFOs.

The device operates from 1.62 to 3.63 volts and is pin-to-pin and software compatible to the ST16C2550, XR16V2550 and XR16V2650.

Key Features

  • of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. Independent programmable baud rate generators are provided in each channel to select data rates up to 16 Mbps at 3.3 Volt with 4X sampling clock. The M2650 is available in 48-pin TQFP and 32-pin QFN packages. NOTE: 1 Covered by U. S. Paten.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR16M554 1.62V To 3.63V Quad UART Sipex Corporation
XR16M554D 1.62V To 3.63V Quad UART Sipex Corporation
XR16M564 1.62V TO 3.63V Quad UART Sipex Corporation
XR16M564D 1.62V TO 3.63V Quad UART Sipex Corporation
XR16M570 1.62V TO 3.63V HIGH PERFORMANCE UART Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR16M2651 HIGH PERFORMANCE DUART
XR16M2550 HIGH PERFORMANCE LOW VOLTAGE DUART
XR16M2551 HIGH PERFORMANCE LOW VOLTAGE DUART
XR16M2750 HIGH PERFORMANCE DUART
XR16M2751 HIGH PERFORMANCE DUART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MAY 2007 XR16M2650 HIGH PERFORMANCE LOW VOLTAGE DUART WITH 32-BYTE FIFO REV. 1.0.2 GENERAL DESCRIPTION The XR16M26501 (M2650) is a high performance dual universal asynchronous receiver and transmitter (UART) with 32 bytes TX and RX FIFOs. The device operates from 1.62 to 3.63 volts and is pin-to-pin and software compatible to the ST16C2550, XR16V2550 and XR16V2650. It supports Exar’s enhanced features of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics.