XR16V2552 Datasheet | Exar

DESCRIPTION The XR16V25521 (V2552) is a high performance dual universal asynchronous receiver and transmitter (UART) with 16 byte TX and RX FIFOs. The device operates from 2.25 to 3.6 volts with 5 Volt tolerant inputs and is pin-to-pin patible to Exar’s ST16C2552 and XR16L2552. The V2552 register set is patible to the ST16C2552 and the XR16L2552. It supports the Exar’s enhanced features of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software (Xon/Xoff) flow control, and a plete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. Independent programmable baud rate generators are provided in each channel to select data rates up to 16 Mbps at 3.3 Volt with 4X sampling clock. The V2552 is available in 44-pin PLCC and 32-pin QFN packages. NOTE: 1 Covered by U.S. Patent #5,649,122 FEATURES - 2.25 to 3.6 Volt Operation - 5 Volt Tolerant Inputs - Pin-to-pin patible to Exar’s XR16L2552 in the 44-PLCC package - Two independent UART channels - - Register set identical to 16V2550 Data rate of up to 16 Mbps at 3.3 V, and 12.5 Mbps at 2.5 V with 4X sampling rate Fractional Baud Rate Generator Transmit and Receive FIFOs of 16 bytes Selectable TX and RX FIFO Trigger Levels Automatic Hardware (RTS/CTS) Flow Control Automatic Software (Xon/Xoff) Flow Control Wireless Infrared (Ir DA 1.0) Encoder/Decoder Automatic sleep mode Full modem interface - - - - - - - - APPLICATIONS - Portable Appliances - Telemunication Network Routers - Ethernet Network Routers - Cellular Data Devices - Factory Automation and Process Controls FIGURE 1. XR16V2552 BLOCK DIAGRAM - Alternate Function Register - Device Identification and Revision - Crystal oscillator (up to 32MHz) or external clock (up to 64MHz) input - 44-PLCC and 32-QFN packages - 5 Volt Tolerant Inputs A2:A0 D7:D0 IOR# IOW# CS# CHSEL INTA INTB TXRDYA# TXRDYB# RXRDYA# RXRDYB# Reset UART Channel A UART Regs 8-bit...