XR21V1412 Datasheet | Exar

2-CH FULL-SPEED USB UART .. JUNE 2009 REV. 1.0.0 GENERAL DESCRIPTION The XR21V1412 (V1412) is an enhanced 2-channel Universal Asynchronous Receiver and Transmitter (UART) with a USB interface. The USB interface is fully pliant to Full Speed USB 2.0 specification that supports 12 Mbps USB data transfer rate. The USB interface also supports USB suspend, resume and remote wakeup operations. The V1412 operates from an internal 48MHz clock therefore no external crystal/oscillator is required like previous generation UARTs. With the fractional baud rate generator, any baud rate can accurately be generated using the internal 48MHz clock. The large 128-byte FIFO and 384-byte RX FIFO of the V1412 helps to optimize the overall data throughput for various applications. The Automatic Transceiver Direction control feature simplifies both the hardware and software for half-duplex RS-485 applications. If required, the multidrop (9-bit) mode with automatic half-duplex transceiver control feature further simplifies typical multidrop RS-485 applications. The V1412 operates from a single 2.97 to 3.63 volt power supply and has 5V tolerant inputs. The V1412 is available in a 32-pin QFN package. Software drivers for Windows 2000, XP, Vista, and CE, as well as Linux and Mac are supported for the XR21V1412. APPLICATIONS Features - USB 2.0 pliant Interface - - Supports 12 Mbps USB full-speed data rate Supports USB suspend, resume and remote wakeup operations Data rates up to 12 Mbps Fractional Baud Rate Generator 128 byte TX FIFO 384 byte RX FIFO 7, 8 or 9 data bits, 1 or 2 stop bits Automatic Hardware (RTS/CTS or DTR/DSR) Flow Control Automatic Software (Xon/Xoff) Flow Control Multidrop mode w/ Transceiver Control Half-Duplex mode Sleep Mode with Remote Wake-up Selectable GPIO or Modem I/O Auto Half-Duplex - Enhanced Features of each UART - - - - - - - - - - - - Multidrop mode w/ Auto TX Enable - Internal 48 MHz clock - Single 2.97-3.63V power...