Datasheet4U Logo Datasheet4U.com

SP2525A - Single Channel USB Power Distribution Switch

General Description

The SP2525A device is an integrated high-side power switch ideal for self-powered and buspowered Universal Serial Bus (USB) applications.

The high-side switches are MOSFETs with 70mΩ RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length.

Key Features

  • +3.0V to +5.5V Input Voltage Range.
  • 500mA Continuous Load Current per Channel.
  • 2.6V Undervoltage Lockout.
  • 1.25A Short Circuit Current Limit.
  • 100mΩ Maximum On-Resistance.
  • 75μA On-State Supply Current.
  • 1μA Shutdown Current.
  • Output can be Forced Higher than Input (Off-State).
  • Thermal Shutdown.
  • Slow Turn On and Fast Turn Off.
  • Active-high Version: SP2525A-1.
  • Active-low Version: SP2525A-2.
  • RoHS Compliant, Green/Halogen Free 8-Pin NSOIC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP2525A USB High-Side Power Switch Sipex
SP2525 +3.0V to +5.5V USB Power Control Switch Sipex
SP2525-1EN +3.0V to +5.5V USB Power Control Switch Sipex
SP2525-2EN +3.0V to +5.5V USB Power Control Switch Sipex
SP2525NUTG 30A Diode Array Littelfuse

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP2526A Dual Channel USB Power Distribution Switch
SP202E High Performance RS-232 Line Drivers/Receivers
SP206 +5V RS-232 Serial Transceivers
SP207 +5V RS-232 Serial Transceivers
SP207E High ESD +5V RS-232 Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
November 2011 SP2525A Single Channel USB Power Distribution Switch Rev. 2.1.0 GENERAL DESCRIPTION The SP2525A device is an integrated high-side power switch ideal for self-powered and buspowered Universal Serial Bus (USB) applications. The high-side switches are MOSFETs with 70mΩ RDS(ON), which meets USB voltage drop requirements for maximum transmission wire length. Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or under voltage lockout. Output current is typically limited to 0.85A below the 5A safety requirement, and the thermal shutdown function shuts the switch off to prevent damage under overcurrent conditions.