Datasheet4U Logo Datasheet4U.com

SP506 - 5V Single Chip WAN Multi-Mode Serial Transceiver

General Description

The SP506 is a monolithic IC that supports eight (8) popular serial interface standards for DTE to DCE connectivity.

The SP506 is pin-to-pin compatible to our SP505 multi-protocol transceiver but with faster throughput.

Key Features

  • with the SP506 include internal loopback that can be initiated in either single-ended or differential modes. While in loopback mode, driver outputs are internally connected to receiver inputs creating an internal signal path convenient for diagnostic testing. This eliminates the need for an external loopback plug. The SP506 also includes a latch enable pin with the driver and receiver address decoder. Tri-state ability for the driver and receiver outputs is controlled by supplying a 4-bit word i.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP506 Multi-Protocol Serial Transceivers Sipex
SP5060 2Ghz Fixed Modulus Frequency Synthesiser GEC Plessey
SP5060 2Ghz Fixed Modulus Frequency Synthesiser Plessey
SP5000 Efficient ZVS CCFL monitor circuit SI-POWER
SP50001 500MHz Low-loss SAW Filter 45MHz Bandwidth SIPAT

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP504 WAN Multi-Mode Serial Transceiver
SP505 WAN Multi-Mode Serial Transceiver
SP507 5V Single Chip WAN Multi-Mode Serial Transceiver
SP508 8 Channel Multi-Protocol Transceiver
SP508E 8 Channel Multi-Protocol Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP506 5V Single Chip WAN Multi-Mode Serial Transceiver • +5V Only Operation • Seven (7) Drivers and Seven (7) Receivers • Driver and Receiver Tri-state Control • Internal Transceiver Termination Resistors for V.11 and V.35 Protocols • Loopback Self-Test Mode • Software Selectable Protocol • Interface Modes Supported: • RS-232 (V.28) • X.21/RS-422 (V.11) • EIA-530 (V.10 & V.11) • EIA-530A (V.10 & V.11) • RS-449 (V.10 & V.11) • V.35 (V.35 & V.28) • V.36 (V.10 & V.11) • RS-485 (un-terminated V.