Datasheet4U Logo Datasheet4U.com

SP6153 - 300kHz Synchronous Buck Controller

General Description

The SP6153 has been designed to be implemented as synchronous step-down switching regulator.

A complete high performance supply using Type III compensation can be created with as few as 11 external components.

Compensation has been optimized based on output voltage and output capacitor selection.

Key Features

  • 4.5V → 30V Input step down converter.
  • Built-in feedback compensation with feed forward.
  • Overcurrent circuit protection with auto-restart using FET RDSon sensing.
  • 300kHz fixed switching frequency.
  • External synchronization capable.
  • Up to 30A output capability.
  • Highly integrated design, minimal components.
  • UVLO detects both VCC and VIN.
  • Power Good and Fault Output.
  • On-board 1Ω sink (1.5Ω source) NFET drivers.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP6120 Synchronous Buck Controller Sipex
SP6120B Low Voltage AnyFETTM Synchronous Buck Controller Sipex
SP6120HV High Voltage Synchronous Buck Controller Sipex
SP6121 Low Voltage / Synchronous Step Down PWM Controller Sipex
SP6122 Low Voltage Buck Controller Sipex

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP6134 600kHz Synchronous PWM Step Down Controller
SP6137 900kHz Synchronous PWM Step Down Controller
SP619 High Current Power Switch
SP6200 100mA/200mA Micropower CMOS LDO Regulators
SP6201 100mA/200mA Micropower CMOS LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
300kHz Synchronous Buck Controller with Frequency Synchronization SP6153 FEATURES „ 4.5V → 30V Input step down converter „ Built-in feedback compensation with feed forward „ Overcurrent circuit protection with auto-restart using FET RDSon sensing „ 300kHz fixed switching frequency „ External synchronization capable „ Up to 30A output capability „ Highly integrated design, minimal components „ UVLO detects both VCC and VIN „ Power Good and Fault Output „ On-board 1Ω sink (1.5Ω source) NFET drivers „ Programmable soft start „ Fast transient response „ High efficiency: Greater than 95% possible „ Evaluation boards available to aid in design Description The SP6153 has been designed to be implemented as synchronous step-down switching regulator.