Datasheet4U Logo Datasheet4U.com

SP6686 - 400mA Buck/Boost Charge Pump LED Driver

General Description

The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications.

The charge pump can be set to regulate two current levels for FLASH and TORCH modes.

Key Features

  • Output Current up to 400mA.
  • Up to 94% Efficiency in Torch Mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP6686 Buck/Boost Charge Pump LED Driver Sipex Corporation
SP6686 400mA Buck/Boost Charge Pump LED Driver MaxLinear
SP6680 High Efficiency Buck/Boost Charge Pump Regulator Sipex
SP6681 High Efficiency Boost Charge Pump Regulator Sipex
SP6682 High Efficiency Charge Pump Regulator for White LEDs Sipex

Other Datasheets by Exar (now MaxLinear)

Part Number Description
SP6682 High Efficiency White LED Charge Pump Regulator
SP6685 700mA Buck/Boost Charge Pump LED Driver
SP6650 High Efficiency 600mA Synchronous Buck Regulator
SP6655 High Efficiency 400mA Synchronous Buck Regulator
SP6669 600mA 1.5MHz Synchronous Step Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
August 2009 SP6686 400mA Buck/Boost Charge Pump LED Driver Rev. 2.0.0 GENERAL DESCRIPTION The SP6686 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH and TORCH modes. The SP6686 automatically switches modes between step-up and step-down ensuring that LED current does not depend on the forward voltage. A low current sense reference voltage (50mV) allows the use of small 0603 current sensing resistors. The SP6686 is designed to operate from a single cell lithium-ion battery or fixed 3.3V or 5.