ST26C32 Datasheet PDF | Exar Corporation

Exar Corporation ST26C32

The ST26C32 is a CMOS quad differential line receiver designed to meet the standard RS-422, RS-423 requirements. The ST26C32 has an input sensitivity of 200mv over the common mode input voltage range of ±7V. The ST26C32 is a high speed line receiver designed to operate with MFM / RLL controllers and hard disk drives as well as RS-422, and RS-423 differential applications.

Part No.	ST26C32
Datasheet	ST26C32 Download
Manufacturer	Exar Corporation
Description	QUAD RS-422 / RS-423 CMOS Differential Line Receiver
Buy	Stock & Price

FEATURES

D Pin-to-Pin Compatible with National DS26C32C D Low Power CMOS Design D Three-State Outputs with Enable Pin D Meets the EIA RS-422 Requirements D Low Propagation Delays D High Speed

GENERAL DESCRIPTION

To improve noise margin and output stability for slow changing input signal, special hysteresis is built in the ST26C32 circuit. ST26C32 provides TTL compatible outputs to interface with standard 74LS and CMOS design environments. ST26C32 is suitable for low power 5V operation. ORDERING INFORMATION Part No. ST26C32CP16 ST26C32CF16 ST26C32IP16 ST26C32IF16 Package 16 Lead 300 Mil PDIP 16 Lead 150 Mil JEDEC SOIC 16 Lead 300 Mil PDIP 16 Lead 150 Mil JEDEC SOIC Operating Temperature Range 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C INPUT AINPUT A+ OUTPUT A INPUT DINPUT D+ OUTPUT D ENABLE -ENABLE OUTPUT B INPUT B+ INPUT B- OUTPUT C INPUT C+ INPUT C- Figure 1. Block Diagram Rev. 1.01 E1991 EXAR Corporation, 48720 Kato Road, Fremont, CA 94538 z (510) 668-7000 z FAX (510) 66...