Datasheet4U Logo Datasheet4U.com

XR2008 - Rail-to-Rail Amplifiers

General Description

The XR1008 (single) and XR2008 (dual) are rail-to-rail output ampli ers that offer superior dynamic performance with 75MHz small signal bandwidth and 50V/μs slew rate.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR20M1170 I2C/SPI UART MaxLinear
XR20M1170 I2C/SPI UART Exar Corporation
XR20M1172 TWO CHANNEL I2C/SPI UART MaxLinear
XR20M1172 TWO CHANNEL I2C/SPI UART Exar Corporation
XR20M1280 I2C/SPI UART MaxLinear

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR2001 High Voltage / High Current Darlington Transistor Arrays
XR2002 High Voltage / High Current Darlington Transistor Arrays
XR2003 High Voltage / High Current Darlington Transistor Arrays
XR2004 High Voltage / High Current Darlington Transistor Arrays
XR2009 Rail-to-Rail Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XR1008, XR2008 0.5mA, 75MHz Rail-to-Rail Amplifiers General Description The XR1008 (single) and XR2008 (dual) are rail-to-rail output ampli ers that offer superior dynamic performance with 75MHz small signal bandwidth and 50V/μs slew rate. The XR1008 and XR2008 ampli ers consume only 505μA of supply current per channel and are designed to operate from a supply range of 2.5V to 5.5V (±1.25 to ±2.75). The combination of low power, high output current drive, and rail-to-rail performance make the XR1008 and XR2008 well suited for battery-powered metering and test equipment. The combination of low cost and high performance make these ampli ers suitable for high volume industrial applications such as ultrasonic heat meters, water meters and other applications requiring high speed and low power.