XRD9814B Datasheet | Exar

FEATURES - 14-Bit (XRD9814B) or 16-Bit (XRD9816B) A/D Converter - Triple-Channel, 2.5 MSPS Color Scan Mode - Single-Channel, 6 MSPS Monochrome Scan Mode - Triple Correlated Double Sampler - Triple 10-Bit Programmable Gain Amplifier - Triple 10-Bit Offset pensation DAC - Fully Differential or Single-Ended Inputs - CDS or S/H Mode - Inverting or Non-Inverting Mode - Internal Voltage Reference - Serial Control: On Data Bus or Separate Pins - Improved PGA Performance GENERAL DESCRIPTION The XRD9814B/9816B is a fully integrated, high-performance analog signal processor/digitizer specifically designed for use in 3-channel linear Charge Coupled Device (CCD) and Contact Image Sensitive (CIS) imaging applications. Each channel of the XRD9814B/9816B includes a Correlated Double Sampler (CDS), Programmable Gain Amplifier (PGA) and channel offset adjustment. After gain and offset adjustment, the analog inputs are sequentially sampled and digitized by an accurate 14/ 16-bit A/D converter. The analog front-end can be configured for inverting/non-inverting input, CDS or sample-hold (S/H) mode, or AC/DC coupling, making the XRD9814B/9816B suitable for use in CCD, CIS and other data acquisition applications. The CDS mode of operation supports both line and pixel-clamp modes and can be used to achieve significant reduction in system 1/f noise and CCD reset clock feed-through. In S/H mode the internal DCrestore voltage clamp can be enabled or disabled to support AC-coupled or DC inputs. Sampling mode, 10-bit PGA gain (1024 linear steps), 8-bit fine offset adjustment (256 linear steps), 2-bit gross offset adjustment and input signal polarity are all programmable through a serial interface. PGA gain range is 1 to 10, and channel offset range is -300m V to 300m V for fine adjustment and additional -400m V to +200m V for gross offset adjustment. The A/D Full-Scale Range (FSR) is programmable to 2V or 3V. - 14-Bit or 8-Bit (Nibble) Parallel Data Output (XRD9814B) - 16-Bit or 8-Bit (Nibble)...