Datasheet4U Logo Datasheet4U.com

XRP7708 - Quad Channel Digital PWM Step Down Controller

General Description

The XRP7708 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface.

Key Features

  • 4 Channel Step Down Controller.
  • 2 x 5A Channels & 2 x 8A Channels.
  • Programmable Output Voltage 0.9V-5.1V.
  • Programmable 1.5MHz DPWM Frequency.
  • 6.5V-20V Single Input Voltage Range.
  • Up to 6 reconfigurable GPIO pins.
  • Fully programmable via I2C interface.
  • Independent Digital Pulse Width Modulator (DPWM) channels.
  • Complete power monitoring and reporting.
  • Full On Board Protection OTP, UVLO, OCP and OVP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XRP7704 Quad-Output Digital PWM Buck Controller MaxLinear
XRP7714 Quad Channel Digital PWM Step-Down Controller MaxLinear
XRP7724 Quad Channel Digital PWM/PFM Programmable Power Management System MaxLinear
XRP7725 Intel Node Manager Compatible Programmable Power Management MaxLinear
XRP7603 0.5A 29V Non-Synchronous Buck High Power LED Driver Exar Corporation

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XRP7704 Quad-Output Digital PWM Buck Controller
XRP7713 Three Channel Digital PWM Step Down Controller
XRP7714 Quad Channel Digital PWM Step Down Controller
XRP7720 Quad Output Universal Customizable PMIC
XRP7724 Quad Channel Digital PWM/PFM Programmable Power Management System

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com X RP 7 7 0 8 Rev. 1.0.3 Quad Channel Digital PWM Step Down Controller February 2010 GENERAL DESCRIPTION The XRP7708 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs. The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface. Independent Digital Pulse Width Modulator (DPWM) channels regulate output voltages and provide all required protection functions such as current limiting and over-voltage protection. Each output voltage can be programmed from 0.9V to 5.1V without the need of an external voltage divider. The wide range of the programmable DPWM switching frequency (from 300 KHz to 1.