XRT72L50 Datasheet PDF | Exar Corporation

Exar Corporation XRT72L50

The XRT72L50, single Channel DS3/E3 Framer IC is designed to accept user data from the Terminal Equipment and insert this data into the payload bitfields within an outbound DS3/E3 Data Stream. The XRT72L50 DS3/E3 Framer device is designed to support full-duplex data flow between Terminal Equipment and an LIU (Line Interface Unit) IC. The Framer Device will transmit, receive and process data in the DS3-C-bit Parity, DS3-M13, E3-ITU-T G.751 and E3ITU-T G.832 Framing Formats.

Part No.	XRT72L50
Datasheet	XRT72L50 Download
Manufacturer	Exar Corporation
Description	SINGLE CHANNEL DS3/E3 FRAMER IC
Buy	Stock & Price

GENERAL DESCRIPTION

Further, the Framer IC is also designed to receive an inbound DS3/E3 Data Stream from the Remote Terminal Equipment and extract out the user data. The XRT72L50 DS3/E3 Framer IC consists of a Transmit section, Receiver section, Performance Monitor Section and a Microprocessor interface. The Transmit Section includes a Transmit Payload Data Input Interface, a Transmit Overhead data Input Interface Section, a Transmit HDLC Controller, a Transmit DS3/E3 Framer block and a Transmit LIU Interface Block which permits the Terminal Equipment to transmit data to a remote terminal. The Receive Section consists of a Receive LIU Interface, a Receive DS3/E3 Framer, a Receive HDLC Controller, a Receive Payload Data Output Interface, and a Receive Overhead Data Interface which allows the local terminal equipment to receive data from remote terminal equipment. The Microprocessor Interface is used to configure the Framer IC in different operating modes and monitor the performance of the Framer.