Exar Corporation XRT73LC00A
The XRT73LC00A DS3/E3/STS-1 Line Interface Unit is a low power CMOS version of the XRT73L00A and consists of a line transmitter and receiver integrated on a single chip and is designed for DS3, E3 or SONET STS-1 applications. The XRT73LC00A also contains a 4-Wire Microprocessor Serial Interface for accessing the on-chip Command registers. In the transmit direction, the XRT73LC00A encodes input data to either B3ZS (for DS3/STS-1 applications) or HDB3 (for E3 applications) format and converts the data into the appropriate pulse shapes for transmission over coaxial cable via a 1:1 transformer.| Part No. | XRT73LC00A |
|---|---|
| Datasheet | XRT73LC00A Download |
| Manufacturer |  Exar Corporation |
| Description | E3/DS3/STS-1 LINE INTERFACE UNIT |
| Buy | Stock & Price |
GENERAL DESCRIPTION
XRT73LC00A can be configured to support the E3 (34.368 Mbps), DS3 (44.736 Mbps) or the SONET STS-1 (51.84 Mbps) rates. In the receive direction the XRT73LC00A performs equalization on incoming signals, performs Clock Recovery, decodes data from either B3ZS or HDB3 format, converts the receive data into TTL/CMOS format, checks for LOS or LOL conditions and detects and declares the occurrence of line code violations. FIGURE 1. BLOCK DIAGRAM OF THE XRT73LC00A E3 STS -1/DS3 Host/(HW )FEATURES
● Incorporates an improved Timing Recovery circuit and is pin and functional compatible to XRT73L00A● Meets E3/DS3/STS-1 Jitter Tolerance Requirements
● Full Loop-Back Capability
● Transmit and Receive Power Down Modes
● Full Redundancy Support
● Contains a 4-Wire Microprocessor Serial Interface
● Uses Minimum External components
● Low Power CMOS Design
● Single +3.3V Power Supply
● 5 V Tolerant pins
● -40°C to +85°C Operating Temperature Range
● Available in a 44 pin TQFP packag...
