TAN-16 Datasheet | Exar

.. How to Generate a 1.544MHz (or 2.048MHz) Clock Signal from an 8kHz Reference Clock July 1998-2 The XRT8000 device can be configured to generate either a T1 (1.544MHz) or E1 (2.048MHz) rate clock signal, from a “Reference Clock signal of frequency 8kHz. The approach that one should use to acplish all of this is presented below. 1. To generate a 1.544MHz clock signal, from an 8kHz clock signal: XR-T8000 8 kHz F IN CLK1 1.544 MHz CLK2 1.544 MHz (CONFIG.) Microcontroller Serial Interface Figure 1. Illustration of the XRT8000 device generating a 1.544MHz clock signal from an 8kHz Reference clock signal (Reverse/Slave Mode). In order to configure...