Datasheet4U Logo Datasheet4U.com

FC7214 - Power Amplifier Module

General Description

FC7214 is a high-power, high

efficiency power amplifier module for K-PCS CDMA wireless handsets.

It consists of a two-stage amplifier, 50-ohm input/output matching networks, and additional bias control circuitry.

Key Features

  • l Small surface mounting package (3x3x1.32mm) l Operating frequency:1750~1780MHz l Single-mode operation up to 28dBm l Low quiescent current: 40mA l Optimized for a 50-Ω system l Lead-free package l No passive component in package l Low leakage current in shutdown mode: < 1uA.

📥 Download Datasheet

Datasheet Details

Part number FC7214
Manufacturer FCI
File Size 292.06 KB
Description Power Amplifier Module
Datasheet download datasheet FC7214 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FC7000 Cutting Pro user manual GRAPHTEC
FC7000-100 CUTTING PLOTTER SERVICE MANUAL GRAPHTEC
FC7000-130 CUTTING PLOTTER SERVICE MANUAL GRAPHTEC
FC7000-160 CUTTING PLOTTER SERVICE MANUAL GRAPHTEC
FC7000-75 CUTTING PLOTTER SERVICE MANUAL GRAPHTEC

Other Datasheets by FCI

Part Number Description
FC7213 Power Amplifier Module
FC7103 Power Amplifier Module for CDMA/AMPS
FC7113 Power Amplifier Module for CDMA/AMPS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Future Communications Integrated circuit Inc. FC7214 Power Amplifier Module for KPCS CDMA DESCRIPTION FC7214 is a high-power, high– efficiency power amplifier module for K-PCS CDMA wireless handsets. It consists of a two-stage amplifier, 50-ohm input/output matching networks, and additional bias control circuitry. FC7214 provides excellent performance up to 28-dBm output power only with single-mode operation. This single-mode operation in FC7214 eliminates the need for mode change between low-power and high-power/high-gain modes. This advantage enables any handsets that use FC7214 to carry out one step calibration in any handsets with low idle current. FC7214 is assembled in a 3-mm x 3-mm leadless package without any passive components in it.