6MBP75TEA120 Datasheet | FE

Features - Temperature protection provided by directly detecting the junction temperature of the IGBTs - Low power loss and soft switching - High performance and high reliability IGBT with overheating protection - Higher reliability because of a big decrease in number of parts in built-in control circuit .. 1200V / 75A 6 in one-package Maximum ratings and characteristics Absolute maximum ratings(at Tc=25°C unless otherwise specified) Item Bus voltage DC Surge Short operating Symbol VDC VDC(surge) V SC VCES IC ICP -IC PC V CC Vin Iin VALM IALM Tj Topr Tstg Tsol Viso Rating Min. Max. 0 0 400 0 -0.5 -0.5 -0.5 -20 -40 900 1000 800 1200 75 150 75 368 20 Vcc+0.5 3 Vcc 20 150 100 125 260 AC2500 3.5 Unit V V V V A A A W V V m A V m A °C °C °C °C V N- m Collector-Emitter voltage - 1 Collector current Inverter DC 1ms DC Collector power dissipation One transistor - 3 Supply voltage of Pre-Driver - 4 Input signal voltage - 5 Input signal current Alarm signal voltage - 6 Alarm signal current - 7 Junction temperature Operating case temperature Storage temperature Solder temperature - 8 Isolating voltage (Terminal to base, 50/60Hz sine wave 1min.) Screw torque Mounting (M5) Note - 1 : Vces shall be applied to the input voltage between terminal P and U or ‚V or W, N and U or V or W - 2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.61/(75 x 2.0) x 100>100% - 3 : Pc=125°C/IGBT Rth(j-c)=125/0.34=368W [Inverter] - 4 : VCC shall be applied to the input voltage between terminal No.4 and 1, 8 and 5, 12 and 9, 14 and 13 - 5 : Vin shall be applied to the input voltage between terminal No.3 and 1, 7 and 5, 11 and 9, 16,17,18 and 13. - 6 :VALM shall be applied to the voltage between terminal No.2 and 1, No6 and 5, No10 and 9, No.19 and 13. - 7 : IALMshall be applied to the input current to terminal No.2,6,10 and 19. - 8 : Immersion time 10±1sec. Electrical characteristics (at Tc=Tj=25°C, Vcc=15V unless otherwise specified.) Main circuit Item Collector current at off signal input Collector-Emitte...