DS_FT312D Datasheet | FTDI

features : - Single chip USB to UART interface. - - Entire USB protocol handled on the chip. No - USB specific firmware programming required. - Supports USB bulk transfer mode - - Basic UART interface with RXD, TXD, RTS#, CTS# pins. - - TX_ACTIVE signal for controlling transceivers - on RS485 interfaces. - UART RX buffer size is 5512 bytes - - UART TX buffer size is 256 bytes - USB_ERROR indicator pin - Suitable for use on any Android platform supporting Android Open Accessory Mode (Typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4) 12MHz oscillator using external crystal. Integrated power-on-reset circuit. +3V3Single Supply Operation with 5V tolerant inputs. USB 2.0 Full Speed patible. Extended operating temperature range; -40⁰C to 85⁰C. Available in pact Pb-free 32 Pin LQFP and QFN packages (both Ro HS pliant). Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or fa ilure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland...