FT313H Datasheet | FTDI

features : - - Single chip USB2.0 Hi-Speed patible. - patible to Enhanced Host Controller - Interface Specification Rev 1.0. - The USB1.1 host is integrated into the USB2.0 - EHCI patible host controller. - Single USB host port. - - Supports data transfer at high-speed (480M bit/s), full-speed (12M bit/s), and low-speed - (1.5M bit/s). - Supports the Isochronous, Interrupt, Control, - and Bulk transfers. - Supports the split transaction for high-speed - Hub and the preamble transaction for full- speed Hub. - Supports multiple processor interfaces with 8bit or 16-bit bus: SRAM, NOR Flash, and General multiplex. - Single configurable interrupt (INT) line for host controller. - Integrated 24k B high speed RAM memory. - Supports DMA operation. - Integrated Phase-Locked Loop (PLL) supports external 12MHz, 19.2MHz, and 24MHz crystal, and direct external clock source input. Low power consumption for portable application. Supports bus interface I/O voltage from 1.62V to 3.63V. Supports hybrid power mode; VCC(3V3) is not present, VCC(I/O) is powered. Internal voltage regulator supplies 1.2v to the digital core. Supports Battery Charging Specification Rev 1.2. The downstream port can be configured as SDP, CDP or DCP. Supports VBUS power switching and over current control. -40°C to 85°C extended operating temperature range. Available in pact Pb-free 64 Pin QFN, LQFP and TQFP packages (all Ro HS pliant). Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or fa ilure of this product. Your statutory rights are...