FT602Q Datasheet | FTDI

features : - Supports USB 3.1 GEN 1 Super Speed - (5Gbps) / USB 2.0 High Speed (480Mbps) - - Supports USB Transfer Types: - Control/Bulk/Interrupt - - Supports UVC version 1.1 - - Supports up to 4 video input channels on the FIFO bus. - - Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface Built-in 16k B FIFO data buffer RAM. Built-in I2C master interface for video device configuration Supports multi voltage I/O: 1.8V, 2.5V and 3.3V. Internal LDO 1.0V regulator. Integrated power-on-reset circuit. User programmable USB and UVC descriptors. Industrial operating temperature range: -40 to 85⁰C. Available in pact Pb-free QFN-76 Ro HS pliant package. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or re produced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered pany Number: SC136640 Copyright © Future Technology Devices International Limited 1 Typical Applications -...