VDIP2 - Vinculum VNC1L Prototyping Module

Description

Pin No.

No connect 5.0 V module supply pin.

Features

Uses F. T. D. I. ’s VNC1L embedded USB host controller I. C. device. Two vertically mounted USB ‘A’ type socket to interface with USB peripheral devices Jumper selectable UART, parallel FIFO, or SPI MCU interfaces. Single 5V supply input. Auxiliary 3.3 V / 200 mA power output to external logic. Power and traffic indicator LED’s. Program or update firmware via USB Flash disk or via UART interface. VNC1L firmware programming control pins PROG# and RESET# brought out onto jumper interface VDIP2 is a Pb-.

FTDI

📥 Download Datasheet

Datasheet Details

Part number	VDIP2
Manufacturer	FTDI
File Size	510.15 KB
Description	Vinculum VNC1L Prototyping Module
Datasheet	VDIP2 Datasheet
Additional preview pages of the VDIP2 datasheet.

📁 Similar Datasheet

VDI100-06P1 - IGBT Modules (IXYS Corporation)
VDI125-12P1 - IGBT Modules (IXYS Corporation)
VDI130-06P1 - IGBT Modules (IXYS)
VDI160-12P1 - IGBT Modules (IXYS)
VDI25-06P1 - IGBT Modules (IXYS)
VDI25-12P1 - IGBT Modules (IXYS)
VDI50-06P1 - IGBT Modules (IXYS)
VDI75-06P1 - IGBT Modules (IXYS)

Other Datasheets by FTDI

VDIP1 - Vinculum VNC1L Module

Full PDF Text Transcription

Click to expand full text

™ Future Technology Devices International Ltd. ™ VDIP2 Vinculum VNC1L Prototyping Module http://www.vinculum.com Copyright © Future Technology Devices International Ltd. 2006-2007 Page 1. I n t r o d u c t i o n a n d F e a t u r es 1.1 Introduction The VDIP2 module is an MCU to embedded USB host controller development module for the VNC1L I.C. device. The VDIP2 is supplied on a PCB designed to fit into a 40 pin DIP socket, and provides access to the UART, parallel FIFO, and SPI interface pins on the VNC1L device, via its AD and AC bus pins. All other Vinculum I/O pins are also accessable.

Published: Nov 8, 2014 |