FUMAN ELECTRONICS SC6961
SC6961 is an LED Controller driven on a 1/7to 1/8 duty factor. Command 1: Display Mode Setting Commands SC6961 provides 2 display mode settings as shown in the diagram below: As stated earlier a command is the first one byte ( b0 to b7 ) transmitted to SC6961 via the DIN Pin when STB is LOW.| Part No. | SC6961 |
|---|---|
| Datasheet | SC6961 Download |
| Manufacturer |  FUMAN ELECTRONICS |
| Description | LED Driver IC |
| Buy | Stock & Price |
DESCRIPTION
Eleven segment output lines, six grid output lines, 1 segment/grid output lines, one display memory, control circuit , key scan circuit are all incorporated into a single chip to build a highly reliable peripheral device for a single chip microcomputer. Serial data is fed to SC6961 via a four-line serial interface. Housed in a 32-pin SO Package, SC6961 pin assignments and application circuit are optimized for easy PCB Layout and cost saving advantages.FEATURES
● CMOS Technology● Low Power Consumption
● Multiple Display Modes ( 12 segment, 6 Grid to 11 segment, 7 Grid )
● Key Scanning ( 10x 3 Matrix )
● 8-Step Dimming Circuitry
● Serial Interface for Clock, Data Input, Data Output, Strobe Pins
● Available in 32-Pin, SOP Package APPLICATION
● Micro-computer Peripheral Device
● VCR set
● Combi set BLOCK DIAGRAM 1 2 3 D DIN DOUT CLK STB OSC R GND C Serial Data Interface Control Dispaly Memory OSC Timing Generator Key Matrix Memory SEGMENT DRIVER/ KEY SCAN OUTPUT/ GRID DRIVER...
