Datasheet4U Logo Datasheet4U.com

DM74ALS38A - Quadruple 2-Input NAND Buffer with Open-Collector Outputs

General Description

This device contains four independent gates, each of which performs the logic NAND function.

The open-collector outputs require external pull-up resistors for proper logical operation.

Key Features

  • s Switching specifications at 50 pF s Switching specifications guaranteed over full temperature and VCC range s Advanced oxide-isolated, ion-implanted Schottky TTL process s Functionally and pin for pin compatible with LS TTL counterpart s Improved AC performance over LS38 s Improved line receiving characteristics Where: N1 (IOH) = total maximum output HIGH current for all outputs tied to pull-up resistor N2 (IIH) = total maximum input HIGH current for all inputs tied to pull-up resistor N3 (I.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DM74ALS390 Dual 4-Bit Decade Counters National Semiconductor
DM74ALS1011A Triple 3 Input AND Buffer National
DM74ALS1242 Quad Bidirectional Bus Drivers National Semiconductor
DM74ALS1242A Quad Bidirectional Bus Driver National
DM74ALS132 DM74ALS132 Quad 2-Input NAND Gate with Schmitt Trigger Inputs National Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
DM74ALS30A 8-Input NAND Gate
DM74ALS32 Quad 2-Input OR Gate
DM74ALS373 Octal D-Type 3-STATE Transparent Latch
DM74ALS374 Octal 3-STATE D-Type Edge-Triggered Flip-Flop
DM74ALS37A Quadruple 2-Input NAND Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DM74ALS38A Quadruple 2-Input NAND Buffer with Open-Collector Outputs September 1986 Revised February 2000 DM74ALS38A Quadruple 2-Input NAND Buffer with Open-Collector Outputs General Description This device contains four independent gates, each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation.