Datasheet4U Logo Datasheet4U.com

DM74S151 - 1-of-8 Data Selector/Multiplexer

General Description

These data selectors/multiplexers contain full on-chip decoding to select the desired data source.

The DM74S151 selects one-of-eight data sources.

The DM74S151 has a strobe input which must be at a low logic level to enable these devices.

Key Features

  • complementary W and Y outputs. Features s Select one-of-eight data lines s Performs parallel-to-serial conversion s Permits multiplexing from N lines to one line s Also for use as Boolean function generator s Typical average propagation delay time, data input to W output 4.5 ns s Typical power dissipation 225 mW Ordering Code: Order Number Package Number Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DM74S157 QUAD 1 OF 2 LINE DATA SELECTORS/MULTIPLEXERS National Semiconductor
DM74S158 QUAD 1 OF 2 LINE DATA SELECTORS/MULTIPLEXERS National Semiconductor
DM74S132 Quad 2-Input Schmitt Trigger NAND Gate National Semiconductor
DM74S161 Synchronous 4-Bit Binary Counters National Semiconductor
DM74S163 Synchronous 4-Bit Binary Counters National Semiconductor

Other Datasheets by Fairchild (now onsemi)

Part Number Description
DM74S153 Dual 1-of-4 Line Data Selector/Multiplexer
DM74S157 Quad 1 of 2 Line Data Selector/Multiplexer
DM74S158 Quad 1 of 2 Line Data Selector/Multiplexer
DM74S10 Triple 3-Input NAND Gate
DM74S11 Triple 3-Input AND Gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DM74S151 1-of-8 Data Selector/Multiplexer with Complementary Outputs August 1986 Revised April 2000 DM74S151 1-of-8 Data Selector/Multiplexer with Complementary Outputs General Description These data selectors/multiplexers contain full on-chip decoding to select the desired data source. The DM74S151 selects one-of-eight data sources. The DM74S151 has a strobe input which must be at a low logic level to enable these devices. A high level at the strobe forces the W output HIGH and the Y output LOW. The DM74S151 features complementary W and Y outputs.